Tweeter  
Full Range   Woofer   Subwoofer   no longer sold  

Peerless


 

 

Tweeter

NE19VTS-04       order no. ty-NE19VTS-04       EUR 39,00 excl. VAT: € 32.77 / $ 38.34
19 mm tweeter with fabric cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 80 W
  • frequency range = 1500-30000 Hz
  • resonance frequency fs = 743 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88,3 dB (2,83V; 1m)
  • DC resistance Re = 2,71 Ohm
  • force factor BL = 1,07 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 4,9 cm2
  • effective mechanical mass incl. air load mms = 0,2 g
  • total Q factor Qts = 1,35 (Qms=3,36, Qes=2,27)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • overall diameter d = 52 mm
  • mounting depth (not countersunk) t = 25,1 mm
  • mass m = 0,06 kg
PDF data sheet

show kits to this chassis hide kits

XT19TD00-04       order no. ty-XT19TD00-04       EUR 43,00 excl. VAT: € 36.13 / $ 42.28
19 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 120 W
  • frequency range = 2000-40000 Hz
  • resonance frequency fs = 763 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 89,1 dB (2,83V; 1m)
  • DC resistance Re = 2,86 Ohm
  • force factor BL = 1,85 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 4,9 cm2
  • effective mechanical mass incl. air load mms = 0,2 g
  • total Q factor Qts = 0,65 (Qms=3,05, Qes=0,83)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 67 mm
  • overall diameter d = 94 mm
  • mounting depth (not countersunk) t = 35,7 mm
  • mass m = 0,32 kg
PDF data sheet

show kits to this chassis hide kits

XT19NC30-04       order no. ty-XT19NC30-04       EUR 29,00 excl. VAT: € 24.37 / $ 28.51
19 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 2500-40000 Hz
  • resonance frequency fs = 973 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 89,4 dB (2,83V; 1m)
  • DC resistance Re = 3,06 Ohm
  • force factor BL = 1,63 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 4,5 cm2
  • effective mechanical mass incl. air load mms = 0,2 g
  • total Q factor Qts = 1,21 (Qms=7,72, Qes=1,44)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 38,6 mm
  • overall diameter d = 66,3 mm
  • mounting depth (not countersunk) t = 25,7 mm
  • mass m = 0,05 kg
PDF data sheet

show kits to this chassis hide kits

DX20BF00-08       order no. ty-DX20BF00-08       EUR 29,00 excl. VAT: € 24.37 / $ 28.51
19 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 60 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 810 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,1 dB (2,83V; 1m)
  • DC resistance Re = 7,52 Ohm
  • force factor BL = 1,06 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 4,9 cm2
  • effective mechanical mass incl. air load mms = 0,1 g
  • total Q factor Qts = 1,71 (Qms=2,86, Qes=4,23)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 49,5 mm
  • overall diameter d = 66 mm
  • mounting depth (not countersunk) t = 35 mm
  • mass m = 0,17 kg
PDF data sheet

show kits to this chassis hide kits

DX20BF00-04       order no. ty-DX20BF00-04       EUR 29,00 excl. VAT: € 24.37 / $ 28.51
19 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 60 W
  • frequency range = 2000-25000 Hz
  • resonance frequency fs = 822 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 90,1 dB (2,83V; 1m)
  • DC resistance Re = 2,81 Ohm
  • force factor BL = 1 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 4,9 cm2
  • effective mechanical mass incl. air load mms = 0,2 g
  • total Q factor Qts = 1,27 (Qms=2,24, Qes=2,93)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 49,5 mm
  • overall diameter d = 66 mm
  • mounting depth (not countersunk) t = 35 mm
  • mass m = 0,17 kg
PDF data sheet

show kits to this chassis hide kits

OX20SC00-04       order no. ty-OX20SC00-04       EUR 29,00 excl. VAT: € 24.37 / $ 28.51
19 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 2500-35000 Hz
  • resonance frequency fs = 1025 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 90,7 dB (2,83V; 1m)
  • DC resistance Re = 3,28 Ohm
  • force factor BL = 1,54 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 4,9 cm2
  • effective mechanical mass incl. air load mms = 0,2 g
  • total Q factor Qts = 1,53 (Qms=9,46, Qes=1,83)
  • voice coil diameter = 19 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • overall diameter d = 33,4 mm
  • mass m = 0,04 kg
PDF data sheet

show kits to this chassis hide kits

BC25TG15-04       order no. ty-BC25TG15-04       EUR 21,00 excl. VAT: € 17.65 / $ 20.65
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 50 W
  • frequency range = 2000-22000 Hz
  • resonance frequency fs = 1128 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 93,2 dB (2,83V; 1m)
  • DC resistance Re = 2,99 Ohm
  • force factor BL = 2,28 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 6,2 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 0,84 (Qms=2,54, Qes=1,26)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,6 mm
  • mounting diameter d = 70 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 32,55 mm
  • mass m = 0,5 kg
PDF data sheet

show kits to this chassis hide kits

BC25SC06-04       order no. ty-BC25SC06-04       EUR 23,00 excl. VAT: € 19.33 / $ 22.61
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 25 W
  • frequency range = 2500-20000 Hz
  • resonance frequency fs = 1395 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 96,2 dB (2,83V; 1m)
  • DC resistance Re = 2,76 Ohm
  • force factor BL = 2,05 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 4,9 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 1,17 (Qms=3,45, Qes=1,76)
  • voice coil diameter = 25 mm
  • mounting diameter d = 46,2 mm
  • overall diameter d = 70 mm
  • mounting depth (not countersunk) t = 34,5 mm
  • mass m = 0,08 kg
PDF data sheet

show kits to this chassis hide kits

BC25SC55-04       order no. ty-BC25SC55-04       EUR 23,00 excl. VAT: € 19.33 / $ 22.61
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 100 W
  • frequency range = 2500-20000 Hz
  • resonance frequency fs = 1400 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 93,3 dB (2,83V; 1m)
  • DC resistance Re = 2,74 Ohm
  • force factor BL = 2,18 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 7,1 cm2
  • effective mechanical mass incl. air load mms = 0,4 g
  • total Q factor Qts = 1,24 (Qms=3,82, Qes=1,83)
  • voice coil diameter = 25 mm
  • overall diameter d = 70x54 mm
  • mounting depth (not countersunk) t = 29,55 mm
  • mass m = 0,08 kg
PDF data sheet

show kits to this chassis hide kits

OC25SC65-04       order no. ty-OC25SC65-04       EUR 25,00 excl. VAT: € 21.01 / $ 24.58
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 25 W
  • frequency range = 2500-20000 Hz
  • resonance frequency fs = 1382 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 93,2 dB (2,83V; 1m)
  • DC resistance Re = 3 Ohm
  • force factor BL = 2,1 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 6,9 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 1,26 (Qms=4,07, Qes=1,83)
  • voice coil diameter = 25 mm
  • overall diameter d = 41,26 mm
  • mass m = 0,05 kg
PDF data sheet

show kits to this chassis hide kits

NE25VTS-04       order no. ty-NE25VTS-04       EUR 44,00 excl. VAT: € 36.97 / $ 43.26
25 mm tweeter with fabric cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1000-25000 Hz
  • resonance frequency fs = 733 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 91,3 dB (2,83V; 1m)
  • DC resistance Re = 3,15 Ohm
  • force factor BL = 2,17 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,4 g
  • total Q factor Qts = 0,89 (Qms=4,41, Qes=1,12)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 48 mm
  • overall diameter d = 66,3 mm
  • mounting depth (not countersunk) t = 31,04 mm
  • mass m = 0,1 kg
PDF data sheet

show kits to this chassis hide kits

NE25VTC-04       order no. ty-NE25VTC-04       EUR 49,00 excl. VAT: € 41.18 / $ 48.18
25 mm tweeter with ceramic cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1000-25000 Hz
  • resonance frequency fs = 730 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 3,2 Ohm
  • force factor BL = 2,1 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,36 g
  • total Q factor Qts = 0,95 (Qms=4,6, Qes=1,2)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 48 mm
  • overall diameter d = 66,3 mm
  • mounting depth (not countersunk) t = 31,5 mm
  • mass m = 0,1 kg

show kits to this chassis hide kits

XT25SC90-04       order no. ty-XT25SC90-04       EUR 47,00 excl. VAT: € 39.50 / $ 46.21
25 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 2000-30000 Hz
  • resonance frequency fs = 825 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 90,1 dB (2,83V; 1m)
  • DC resistance Re = 3,13 Ohm
  • force factor BL = 2,18 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 8,6 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 0,93 (Qms=7,17, Qes=1,07)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 46,5 mm
  • overall diameter d = 65 mm
  • mass m = 0,07 kg
PDF data sheet

show kits to this chassis hide kits

XT25TG30-04       order no. ty-XT25TG30-04       EUR 45,00 excl. VAT: € 37.82 / $ 44.24
25 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 110 W
  • frequency range = 2000-40000 Hz
  • resonance frequency fs = 436 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 90,8 dB (2,83V; 1m)
  • DC resistance Re = 3 Ohm
  • force factor BL = 2,36 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 8,2 cm2
  • effective mechanical mass incl. air load mms = 0,4 g
  • total Q factor Qts = 0,44 (Qms=2,5, Qes=0,54)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 40,1 mm
  • mass m = 0,5 kg
PDF data sheet

show kits to this chassis hide kits

XT25SC30-04       order no. ty-XT25SC30-04       - not available
25 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1500-40000 Hz
  • resonance frequency fs = 649 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 90,4 dB (2,83V; 1m)
  • DC resistance Re = 2,75 Ohm
  • force factor BL = 2,27 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 8,2 cm2
  • effective mechanical mass incl. air load mms = 0,4 g
  • total Q factor Qts = 0,61 (Qms=2,65, Qes=0,79)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 83 mm
  • overall diameter d = 104,3 mm
  • mounting depth (not countersunk) t = 45,81 mm
  • mass m = 0,42 kg
PDF data sheet

show kits to this chassis hide kits

DX25TG59-04       order no. ty-DX25TG59-04       EUR 29,00 excl. VAT: € 24.37 / $ 28.51
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 100 W
  • frequency range = 2000-23000 Hz
  • resonance frequency fs = 640 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • DC resistance Re = 2,93 Ohm
  • force factor BL = 2,41 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 8,2 cm2
  • effective mechanical mass incl. air load mms = 0,4 g
  • total Q factor Qts = 0,57 (Qms=2,46, Qes=0,74)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 33 mm
  • mass m = 0,5 kg
PDF data sheet

show kits to this chassis hide kits

DX25BG60-04       order no. ty-DX25BG60-04       EUR 58,00 excl. VAT: € 48.74 / $ 57.03
25 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 1500-30000 Hz
  • resonance frequency fs = 415 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 94 dB (2,83V; 1m)
  • DC resistance Re = 3,47 Ohm
  • force factor BL = 2,46 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 8 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 0,36 (Qms=1,4, Qes=0,48)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,1 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 61 mm
  • mass m = 0,8 kg
PDF data sheet

show kits to this chassis hide kits

DA25BG08-04       order no. ty-DA25BG08-04       EUR 49,00 excl. VAT: € 41.18 / $ 48.18
25 mm tweeter with aluminium cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1500-30000 Hz
  • resonance frequency fs = 770 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 94,7 dB (2,83V; 1m)
  • DC resistance Re = 3,1 Ohm
  • force factor BL = 2,38 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 6,7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 0,57 (Qms=1,88, Qes=0,82)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,7 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104,3 mm
  • mounting depth (not countersunk) t = 44 mm
  • mass m = 0,68 kg
PDF data sheet

show kits to this chassis hide kits

DA25BG08-08       order no. ty-DA25BG08-08       EUR 49,00 excl. VAT: € 41.18 / $ 48.18
25 mm tweeter with aluminium cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 100 W
  • frequency range = 1500-30000 Hz
  • resonance frequency fs = 795 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,9 dB (2,83V; 1m)
  • DC resistance Re = 6,72 Ohm
  • force factor BL = 3,1 N/A
  • voice coil inductance L = 0,01 mH
  • effective piston radiating area Sd = 6,7 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 0,69 (Qms=1,89, Qes=1,09)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,7 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104,3 mm
  • mounting depth (not countersunk) t = 44 mm
  • mass m = 0,68 kg
PDF data sheet

show kits to this chassis hide kits

D26NC56-06       order no. ty-D26NC56-06       EUR 48,00 excl. VAT: € 40.34 / $ 47.19
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 100 W
  • frequency range = 3000-25000 Hz
  • resonance frequency fs = 1625 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 90,7 dB (2,83V; 1m)
  • DC resistance Re = 4,68 Ohm
  • force factor BL = 2,19 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 7,1 cm2
  • effective mechanical mass incl. air load mms = 0,4 g
  • total Q factor Qts = 0,97 (Qms=1,33, Qes=3,59)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 45 mm
  • overall diameter d = 70x54 mm
  • mounting depth (not countersunk) t = 27,6 mm
  • mass m = 0,08 kg
PDF data sheet

show kits to this chassis hide kits

D27TG35-06       order no. ty-D27TG35-06       EUR 39,00 excl. VAT: € 32.77 / $ 38.34
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 100 W
  • frequency range = 2000-23000 Hz
  • resonance frequency fs = 912 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 92,8 dB (2,83V; 1m)
  • DC resistance Re = 4,89 Ohm
  • force factor BL = 2,48 N/A
  • voice coil inductance L = 0,04 mH
  • effective piston radiating area Sd = 7,1 cm2
  • effective mechanical mass incl. air load mms = 0,2 g
  • total Q factor Qts = 0,55 (Qms=1,21, Qes=1,01)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 81 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 38,9 mm
  • mass m = 0,52 kg
PDF data sheet

show kits to this chassis hide kits


 

Full Range

PLS-P830970 (WB 2,00 FR/04)       order no. ty-PLS-P830970       EUR 33,00 excl. VAT: € 27.73 / $ 32.45
$dd cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 25 W
  • frequency range = 200-20000 Hz
  • resonance frequency fs = 166 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,3 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 2,79 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 13,9 cm2
  • effective mechanical mass incl. air load mms = 1,4 g
  • equivalent volume of compliance Vas = 0,18 l
  • total Q factor Qts = 0,57 (Qms=3,85, Qes=0,67)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 1,7 mm
  • mounting diameter d = 50 mm
  • overall diameter d = 55x55 mm
  • mounting depth (not countersunk) t = 33,2 mm
  • mass m = 0,14 kg
PDF data sheet

show kits to this chassis hide kits

PLS-P830983 (WB 2,00 LT/04)       order no. ty-PLS-P830983       EUR 33,00 excl. VAT: € 27.73 / $ 32.45
$dd cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 25 W
  • frequency range = 200-20000 Hz
  • resonance frequency fs = 176 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 3,6 Ohm
  • force factor BL = 2,83 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 15,2 cm2
  • effective mechanical mass incl. air load mms = 1,6 g
  • equivalent volume of compliance Vas = 0,16 l
  • total Q factor Qts = 0,71 (Qms=5,63, Qes=0,81)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 1,7 mm
  • mounting diameter d = 50 mm
  • overall diameter d = 55x55 mm
  • mounting depth (not countersunk) t = 33,2 mm
  • mass m = 0,14 kg
PDF data sheet

show kits to this chassis hide kits

PLS-P830984 (WB 2,50 FR/08)       order no. ty-PLS-P830984       EUR 33,00 excl. VAT: € 27.73 / $ 32.45
$dd cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 25 W
  • frequency range = 100-18000 Hz
  • resonance frequency fs = 111 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 83 dB (2,83V; 1m)
  • DC resistance Re = 6,25 Ohm
  • force factor BL = 3,27 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 22,2 cm2
  • effective mechanical mass incl. air load mms = 2 g
  • equivalent volume of compliance Vas = 0,71 l
  • total Q factor Qts = 0,72 (Qms=5,41, Qes=0,83)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 2,1 mm
  • mounting diameter d = 61,6 mm
  • overall diameter d = 69x69 mm
  • mass m = 0,15 kg
PDF data sheet

show kits to this chassis hide kits

PLS-P830985 (WB 2,50 FR/04)       order no. ty-PLS-P830985       EUR 36,00 excl. VAT: € 30.25 / $ 35.39
$dd cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 30 W
  • frequency range = 100-15000 Hz
  • resonance frequency fs = 117 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,4 dB (2,83V; 1m)
  • DC resistance Re = 3,63 Ohm
  • force factor BL = 2,61 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 21,2 cm2
  • effective mechanical mass incl. air load mms = 1,9 g
  • equivalent volume of compliance Vas = 0,61 l
  • total Q factor Qts = 0,63 (Qms=4,08, Qes=0,75)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 1,7 mm
  • mounting diameter d = 61,6 mm
  • overall diameter d = 69x69 mm
  • mass m = 0,14 kg
PDF data sheet

show kits to this chassis hide kits

PLS-P830986 (WB 3,00 LT/08)       order no. ty-PLS-P830986       EUR 45,00 excl. VAT: € 37.82 / $ 44.24
$dd cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 25 W
  • frequency range = 100-15000 Hz
  • resonance frequency fs = 105 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84 dB (2,83V; 1m)
  • DC resistance Re = 6,22 Ohm
  • force factor BL = 3,43 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 27,3 cm2
  • effective mechanical mass incl. air load mms = 2,6 g
  • equivalent volume of compliance Vas = 0,94 l
  • total Q factor Qts = 0,76 (Qms=5,15, Qes=0,89)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 2,1 mm
  • mounting diameter d = 71,9 mm
  • overall diameter d = 78x78 mm
  • mounting depth (not countersunk) t = 46,7 mm
  • mass m = 0,21 kg
PDF data sheet

show kits to this chassis hide kits

PLS-P830987 (WB 3,00 FR/08)       order no. ty-PLS-P830987       EUR 39,00 excl. VAT: € 32.77 / $ 38.34
$dd cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 25 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 108 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 83,6 dB (2,83V; 1m)
  • DC resistance Re = 6,15 Ohm
  • force factor BL = 3 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 28,8 cm2
  • effective mechanical mass incl. air load mms = 2,5 g
  • equivalent volume of compliance Vas = 1,03 l
  • total Q factor Qts = 0,96 (Qms=6,19, Qes=1,14)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 2,1 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 78x78 mm
  • mounting depth (not countersunk) t = 46,7 mm
  • mass m = 0,22 kg
PDF data sheet

show kits to this chassis hide kits

TC6FD00-04       order no. ty-TC6FD00-04       EUR 15,00 excl. VAT: € 12.61 / $ 14.75
$dd cm full range driver with high quality cone.
  • power handling (continuous/programme) = 15 W
  • frequency range = 100-25000 Hz
  • resonance frequency fs = 175 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 84,5 dB (2,83V; 1m)
  • DC resistance Re = 3,54 Ohm
  • force factor BL = 1,92 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 15,2 cm2
  • effective mechanical mass incl. air load mms = 1,2 g
  • equivalent volume of compliance Vas = 0,22 l
  • total Q factor Qts = 0,98 (Qms=4,09, Qes=1,29)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 50 mm
  • overall diameter d = 55x55 mm
  • mounting depth (not countersunk) t = 32 mm
  • mass m = 0,17 kg
PDF data sheet

show kits to this chassis hide kits

TC7FD00-04       order no. ty-TC7FD00-04       EUR 15,00 excl. VAT: € 12.61 / $ 14.75
$dd cm full range driver with high quality cone.
  • power handling (continuous/programme) = 20 W
  • frequency range = 100-25000 Hz
  • resonance frequency fs = 143 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86,4 dB (2,83V; 1m)
  • DC resistance Re = 3,22 Ohm
  • force factor BL = 1,97 N/A
  • voice coil inductance L = 0,02 mH
  • effective piston radiating area Sd = 22,1 cm2
  • effective mechanical mass incl. air load mms = 1,6 g
  • equivalent volume of compliance Vas = 0,51 l
  • total Q factor Qts = 0,92 (Qms=3,66, Qes=1,22)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 1 mm
  • mounting diameter d = 58,1 mm
  • overall diameter d = 70x70 mm
  • mounting depth (not countersunk) t = 33,3 mm
  • mass m = 0,18 kg
PDF data sheet

show kits to this chassis hide kits

TC8FD00-04       order no. ty-TC8FD00-04       EUR 19,00 excl. VAT: € 15.97 / $ 18.68
$dd cm full range driver with high quality cone.
  • power handling (continuous/programme) = 25 W
  • frequency range = 100-16000 Hz
  • resonance frequency fs = 125 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,7 dB (2,83V; 1m)
  • DC resistance Re = 3,29 Ohm
  • force factor BL = 2,32 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 33,2 cm2
  • effective mechanical mass incl. air load mms = 2,6 g
  • equivalent volume of compliance Vas = 0,99 l
  • total Q factor Qts = 0,92 (Qms=3,7, Qes=1,23)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 2,4 mm
  • mounting diameter d = 77,6 mm
  • overall diameter d = 81,3x81,3 mm
  • mounting depth (not countersunk) t = 42 mm
  • mass m = 0,3 kg
PDF data sheet

show kits to this chassis hide kits

TC9FD18-08       order no. ty-TC9FD-18-08       EUR 16,80 excl. VAT: € 14.12 / $ 16.52
$dd cm full range driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 125 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84,6 dB (2,83V; 1m)
  • DC resistance Re = 6,32 Ohm
  • force factor BL = 3,01 N/A
  • voice coil inductance L = 0,05 mH
  • effective piston radiating area Sd = 36,3 cm2
  • effective mechanical mass incl. air load mms = 2,4 g
  • equivalent volume of compliance Vas = 1,24 l
  • total Q factor Qts = 0,89 (Qms=2,73, Qes=1,33)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 2,6 mm
  • mounting diameter d = 77,9 mm
  • overall diameter d = 84x84 mm
  • mounting depth (not countersunk) t = 38,15 mm
  • mass m = 0,3 kg
PDF data sheet

show kits to this chassis hide kits

TG9FD10-04       order no. ty-TG9FD-10-04       EUR 28,90 excl. VAT: € 24.29 / $ 28.41
$dd cm full range driver with glass fibre cone.
  • power handling (continuous/programme) = 10 W
  • frequency range = 100-15000 Hz
  • resonance frequency fs = 113 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 87,2 dB (2,83V; 1m)
  • DC resistance Re = 3,25 Ohm
  • force factor BL = 2,4 N/A
  • voice coil inductance L = 0,07 mH
  • effective piston radiating area Sd = 36,3 cm2
  • effective mechanical mass incl. air load mms = 2,8 g
  • equivalent volume of compliance Vas = 1,29 l
  • total Q factor Qts = 0,83 (Qms=3,04, Qes=1,14)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 2,6 mm
  • mounting diameter d = 77,9 mm
  • overall diameter d = 84x84 mm
  • mounting depth (not countersunk) t = 38,35 mm
  • mass m = 0,3 kg
PDF data sheet

show kits to this chassis hide kits

TG9FD10-08       order no. ty-TG9FD-10-08       EUR 28,90 excl. VAT: € 24.29 / $ 28.41
$dd cm full range driver with glass fibre cone.
  • power handling (continuous/programme) = 25 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 105 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84,4 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 3,32 N/A
  • voice coil inductance L = 0,11 mH
  • effective piston radiating area Sd = 36,3 cm2
  • effective mechanical mass incl. air load mms = 2,47 g
  • equivalent volume of compliance Vas = 0,99 l
  • total Q factor Qts = 0,73 (Qms=1,8, Qes=1,23)
  • voice coil diameter = 20 mm
  • maximum peak linear excursion vibration xlin = +/- 2,6 mm
  • mounting diameter d = 77,9 mm
  • overall diameter d = 84x84 mm
  • mounting depth (not countersunk) t = 38,35 mm
  • mass m = 0,3 kg
PDF data sheet

show kits to this chassis hide kits

NE65W-04       order no. ty-NE65W-04       EUR 49,00 excl. VAT: € 41.18 / $ 48.18
6 cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 25 W
  • frequency range = 150-30000 Hz
  • resonance frequency fs = 166 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,7 dB (2,83V; 1m)
  • DC resistance Re = 3,66 Ohm
  • force factor BL = 2,85 N/A
  • voice coil inductance L = 0,04 mH
  • effective piston radiating area Sd = 14,7 cm2
  • effective mechanical mass incl. air load mms = 1,6 g
  • equivalent volume of compliance Vas = 0,18 l
  • total Q factor Qts = 0,64 (Qms=5,01, Qes=0,74)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 1,7 mm
  • mounting diameter d = 54,4 mm
  • overall diameter d = 65 mm
  • mounting depth (not countersunk) t = 37,3 mm
  • mass m = 0,14 kg
PDF data sheet

show kits to this chassis hide kits

NE85W-04       order no. ty-NE85W-04       EUR 49,00 excl. VAT: € 41.18 / $ 48.18
7 cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 25 W
  • frequency range = 100-20000 Hz
  • resonance frequency fs = 105 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 3,65 Ohm
  • force factor BL = 2,75 N/A
  • voice coil inductance L = 0,06 mH
  • effective piston radiating area Sd = 22,3 cm2
  • effective mechanical mass incl. air load mms = 2,2 g
  • equivalent volume of compliance Vas = 0,73 l
  • total Q factor Qts = 0,64 (Qms=8,45, Qes=0,69)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 1,8 mm
  • mounting diameter d = 57,12 mm
  • overall diameter d = 85 mm
  • mounting depth (not countersunk) t = 51,3 mm
  • mass m = 0,21 kg
PDF data sheet

show kits to this chassis hide kits

NE95W-04       order no. ty-NE95W-04       EUR 56,00 excl. VAT: € 47.06 / $ 55.06
8 cm full range driver with aluminium cone. The magnet system is based on Neodymium technology.
  • power handling (continuous/programme) = 25 W
  • frequency range = 100-15000 Hz
  • resonance frequency fs = 103 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 3,67 Ohm
  • force factor BL = 2,76 N/A
  • voice coil inductance L = 0,06 mH
  • effective piston radiating area Sd = 28,6 cm2
  • effective mechanical mass incl. air load mms = 2,5 g
  • equivalent volume of compliance Vas = 1,11 l
  • total Q factor Qts = 0,72 (Qms=9,88, Qes=0,78)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 1,8 mm
  • mounting diameter d = 64,7 mm
  • overall diameter d = 95 mm
  • mounting depth (not countersunk) t = 53,7 mm
  • mass m = 0,24 kg
PDF data sheet

show kits to this chassis hide kits


 

Woofer


open a bigger photo

recommended cabinet 1:
closed cabinet with 1,2 L volume
from 113/72 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,9 L volume bass reflex cabinet
with HP35 reflex tube, 13 cm long.
from 54/45 Hz (-3dB/-8dB).

SDS-P830855 (SDS 4-25/08)       order no. ty-SDS-P830855       EUR 36,00 excl. VAT: € 30.25 / $ 35.39
11 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 60-4000 Hz
  • resonance frequency fs = 63,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84,8 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,58 N/A
  • voice coil inductance L = 0,24 mH
  • effective piston radiating area Sd = 50,3 cm2
  • effective mechanical mass incl. air load mms = 6,9 g
  • equivalent volume of compliance Vas = 3,28 l
  • total Q factor Qts = 0,44 (Qms=4,66, Qes=0,49)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 92,5 mm
  • overall diameter d = 123,3 mm
  • mounting depth (not countersunk) t = 54,5 mm
  • mass m = 0,74 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 0,65 L volume
from 143/90 Hz (-3dB/-8dB)
 
recommended cabinet 2:
2,2 L volume bass reflex cabinet
with HP35 reflex tube, 20 cm long.
from 74/58 Hz (-3dB/-8dB).

SDS-P830856 (SDS 106TV)       order no. ty-830856       EUR 44,00 excl. VAT: € 36.97 / $ 43.26
11 cm bass-midrange driver with paper cone. The driver is magnetically shielded.
  • frequency range = 60-3000 Hz
  • resonance frequency fs = 62,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,7 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 6,2 N/A
  • voice coil inductance L = 0,9 mH
  • effective piston radiating area Sd = 49 cm2
  • effective mechanical mass incl. air load mms = 6,6 g
  • equivalent volume of compliance Vas = 3,3 l
  • total Q factor Qts = 0,35 (Qms=3,8, Qes=0,38)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 93 mm
  • overall diameter d = 124 mm
  • mounting depth (not countersunk) t = 65,8 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 8,3 L volume
from 78/49 Hz (-3dB/-8dB)
 
recommended cabinet 2:
32 L volume bass reflex cabinet
with HP70 reflex tube, 15 cm long.
from 35/31 Hz (-3dB/-8dB).

SDS-P830656 (SDS-5-25/08)       order no. ty-SDS-P830656       EUR 25,00 excl. VAT: € 21.01 / $ 24.58
14 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 60-5000 Hz
  • resonance frequency fs = 57 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,7 dB (2,83V; 1m)
  • DC resistance Re = 6,06 Ohm
  • force factor BL = 5,36 N/A
  • voice coil inductance L = 0,37 mH
  • effective piston radiating area Sd = 86,6 cm2
  • effective mechanical mass incl. air load mms = 9,3 g
  • equivalent volume of compliance Vas = 8,77 l
  • total Q factor Qts = 0,59 (Qms=3,6, Qes=0,7)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 117 mm
  • overall diameter d = 152 mm
  • mounting depth (not countersunk) t = 58,4 mm
  • mass m = 0,68 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 12,4 L volume
from 79/50 Hz (-3dB/-8dB)
 
recommended cabinet 2:
50 L volume bass reflex cabinet
with HP70 reflex tube, 8 cm long.
from 37/31 Hz (-3dB/-8dB).

SDS-P830657 (SDS 6-25/08)       order no. ty-SDS-P830657       EUR 30,00 excl. VAT: € 25.21 / $ 29.50
16 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 60-3000 Hz
  • resonance frequency fs = 45 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 6,05 Ohm
  • force factor BL = 5,98 N/A
  • voice coil inductance L = 0,38 mH
  • effective piston radiating area Sd = 141 cm2
  • effective mechanical mass incl. air load mms = 11,5 g
  • equivalent volume of compliance Vas = 30,8 l
  • total Q factor Qts = 0,46 (Qms=2,74, Qes=0,55)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 144 mm
  • overall diameter d = 182 mm
  • mounting depth (not countersunk) t = 72,1 mm
  • mass m = 0,84 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 1,5 L volume
from 136/86 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,2 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 62/53 Hz (-3dB/-8dB).

HDS-P830870 (HDS-PPB 4-25/08)       order no. ty-HDS-P830870       EUR 49,00 excl. VAT: € 41.18 / $ 48.18
11 cm bass-midrange driver with polypropylene cone.
  • power handling (continuous/programme) = 25 W
  • frequency range = 80-7000 Hz
  • resonance frequency fs = 91 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85,9 dB (2,83V; 1m)
  • DC resistance Re = 5,17 Ohm
  • force factor BL = 4,94 N/A
  • voice coil inductance L = 0,16 mH
  • effective piston radiating area Sd = 56,8 cm2
  • effective mechanical mass incl. air load mms = 6,1 g
  • equivalent volume of compliance Vas = 2,28 l
  • total Q factor Qts = 0,53 (Qms=1,92, Qes=0,74)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 94,8 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 55,3 mm
  • mass m = 0,92 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 3,6 L volume
from 106/67 Hz (-3dB/-8dB)
 
recommended cabinet 2:
14,6 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 50/42 Hz (-3dB/-8dB).

HDS-P830860 (HDS-PPB 5-25/08)       order no. ty-HDS-P830860       EUR 58,00 excl. VAT: € 48.74 / $ 57.03
$dd cm bass-midrange driver with polypropylene cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 50-6000 Hz
  • resonance frequency fs = 62 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 5,9 N/A
  • voice coil inductance L = 0,27 mH
  • effective piston radiating area Sd = 89,9 cm2
  • effective mechanical mass incl. air load mms = 9 g
  • equivalent volume of compliance Vas = 8,41 l
  • total Q factor Qts = 0,47 (Qms=2,21, Qes=0,59)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • overall diameter d = 151,8 mm
  • mounting depth (not countersunk) t = 61,3 mm
  • mass m = 1,06 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 4,2 L volume
from 109/69 Hz (-3dB/-8dB)
 
recommended cabinet 2:
16 L volume bass reflex cabinet
with HP70 reflex tube, 16 cm long.
from 53/43 Hz (-3dB/-8dB).

HDS-P830874 (HDS-PPB 6-33/08)       order no. ty-HDS-P830874       EUR 72,00 excl. VAT: € 60.50 / $ 70.79
16 cm bass-midrange driver with polypropylene cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 50-4000 Hz
  • resonance frequency fs = 58 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,4 dB (2,83V; 1m)
  • DC resistance Re = 6,5 Ohm
  • force factor BL = 8,82 N/A
  • voice coil inductance L = 0,42 mH
  • effective piston radiating area Sd = 143,1 cm2
  • effective mechanical mass incl. air load mms = 17,3 g
  • equivalent volume of compliance Vas = 12,5 l
  • total Q factor Qts = 0,43 (Qms=2,29, Qes=0,53)
  • voice coil diameter = 32 mm
  • maximum peak linear excursion vibration xlin = +/- 5,3 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 182 mm
  • mounting depth (not countersunk) t = 78 mm
  • mass m = 1,58 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 5,5 L volume
from 91/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
20 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 46/37 Hz (-3dB/-8dB).

HDS-P830883 (HDS-E 6-33/08)       order no. ty-HDS-P830883       EUR 89,00 excl. VAT: € 74.79 / $ 87.50
16 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 70 W
  • frequency range = 40-3000 Hz
  • resonance frequency fs = 43 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 5,85 Ohm
  • force factor BL = 7,7 N/A
  • voice coil inductance L = 0,18 mH
  • effective piston radiating area Sd = 143,1 cm2
  • effective mechanical mass incl. air load mms = 17,3 g
  • equivalent volume of compliance Vas = 22,9 l
  • total Q factor Qts = 0,38 (Qms=2,18, Qes=0,46)
  • voice coil diameter = 32 mm
  • maximum peak linear excursion vibration xlin = +/- 5,6 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 180 mm
  • mounting depth (not countersunk) t = 78 mm
  • mass m = 1,64 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
17 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 51/40 Hz (-3dB/-8dB).

HDS-P830875 (HDS-N 6-33/08)       order no. ty-HDS-P830875       EUR 75,00 excl. VAT: € 63.03 / $ 73.74
16 cm bass-midrange driver with high quality cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 40-2000 Hz
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,37 Ohm
  • force factor BL = 8,47 N/A
  • voice coil inductance L = 0,41 mH
  • effective piston radiating area Sd = 143,1 cm2
  • effective mechanical mass incl. air load mms = 15,9 g
  • equivalent volume of compliance Vas = 21,8 l
  • total Q factor Qts = 0,36 (Qms=3,19, Qes=0,41)
  • voice coil diameter = 32 mm
  • maximum peak linear excursion vibration xlin = +/- 5,3 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 182,3 mm
  • mounting depth (not countersunk) t = 78 mm
  • mass m = 1,56 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 13 L volume
from 76/48 Hz (-3dB/-8dB)
 
recommended cabinet 2:
39 L volume bass reflex cabinet
with HP100 reflex tube, 32 cm long.
from 42/32 Hz (-3dB/-8dB).

HDS-P830869 (HDS-N 8-33/08)       order no. ty-HDS-P830869       EUR 92,00 excl. VAT: € 77.31 / $ 90.45
21 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 30-1500 Hz
  • resonance frequency fs = 29,6 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,3 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 8,92 N/A
  • voice coil inductance L = 0,63 mH
  • effective piston radiating area Sd = 227 cm2
  • effective mechanical mass incl. air load mms = 24 g
  • equivalent volume of compliance Vas = 87,41 l
  • total Q factor Qts = 0,31 (Qms=4,4, Qes=0,33)
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 190 mm
  • overall diameter d = 225 mm
  • mounting depth (not countersunk) t = 89,5 mm
  • mass m = 1,74 kg
PDF data sheet

show kits to this chassis hide kits

HDS-P835023 (HDS-AL 4-25/08)       order no. ty-HDS-P835023       EUR 79,00 excl. VAT: € 66.39 / $ 77.67
11 cm bass-midrange driver with aluminium cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 70-5000 Hz
  • resonance frequency fs = 82 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84 dB (2,83V; 1m)
  • DC resistance Re = 5,32 Ohm
  • force factor BL = 5,01 N/A
  • voice coil inductance L = 0,26 mH
  • effective piston radiating area Sd = 56,8 cm2
  • effective mechanical mass incl. air load mms = 7,3 g
  • equivalent volume of compliance Vas = 2,33 l
  • total Q factor Qts = 0,62 (Qms=2,81, Qes=0,8)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 3,1 mm
  • mounting diameter d = 94,8 mm
  • overall diameter d = 120 mm
  • mounting depth (not countersunk) t = 55,3 mm
  • mass m = 0,91 kg
PDF data sheet

show kits to this chassis hide kits

HDS-P835024 (HDS-AL 5-25/08)       order no. ty-HDS-P835024       EUR 89,00 excl. VAT: € 74.79 / $ 87.50
$dd cm bass-midrange driver with aluminium cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 60-6000 Hz
  • resonance frequency fs = 72 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 5,91 Ohm
  • force factor BL = 5,88 N/A
  • voice coil inductance L = 0,24 mH
  • effective piston radiating area Sd = 91,6 cm2
  • effective mechanical mass incl. air load mms = 10,6 g
  • equivalent volume of compliance Vas = 5,39 l
  • total Q factor Qts = 0,65 (Qms=3,18, Qes=0,82)
  • voice coil diameter = 30 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • overall diameter d = 151,8 mm
  • mounting depth (not countersunk) t = 61,3 mm
  • mass m = 1,06 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 2,3 L volume
from 122/77 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,8 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 54/48 Hz (-3dB/-8dB).

HDS-P830992 (HDS-GFP 4-25/08)       order no. ty-HDS-P830992       EUR 59,00 excl. VAT: € 49.58 / $ 58.01
11 cm bass-midrange driver with glass fibre cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 70-4000 Hz
  • resonance frequency fs = 89 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 5,25 Ohm
  • force factor BL = 4,91 N/A
  • voice coil inductance L = 0,24 mH
  • effective piston radiating area Sd = 56,1 cm2
  • effective mechanical mass incl. air load mms = 5,9 g
  • equivalent volume of compliance Vas = 2,41 l
  • total Q factor Qts = 0,58 (Qms=2,95, Qes=0,72)
  • voice coil diameter = 30 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 94,8 mm
  • overall diameter d = 120,4 mm
  • mounting depth (not countersunk) t = 55,3 mm
  • mass m = 0,91 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 3,3 L volume
from 109/69 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,5 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 51/43 Hz (-3dB/-8dB).

HDS-P830991 (HDS-GFP 5-25/08)       order no. ty-HDS-P830991       EUR 69,00 excl. VAT: € 57.98 / $ 67.84
$dd cm bass-midrange driver with glass fibre cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 60-6000 Hz
  • resonance frequency fs = 66 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,99 Ohm
  • force factor BL = 6,42 N/A
  • voice coil inductance L = 0,33 mH
  • effective piston radiating area Sd = 89,9 cm2
  • effective mechanical mass incl. air load mms = 9,7 g
  • equivalent volume of compliance Vas = 6,81 l
  • total Q factor Qts = 0,48 (Qms=2,96, Qes=0,58)
  • voice coil diameter = 30 mm
  • maximum peak linear excursion vibration xlin = +/- 4,6 mm
  • overall diameter d = 151,8 mm
  • mounting depth (not countersunk) t = 61,3 mm
  • mass m = 1,05 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 5,2 L volume
from 95/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 48/38 Hz (-3dB/-8dB).

HDS-P830990 (HDS-GFP 6/08)       order no. ty-HDS-P830990       EUR 95,00 excl. VAT: € 79.83 / $ 93.40
16 cm bass-midrange driver with glass fibre cone.
  • power handling (continuous/programme) = 50 W
  • frequency range = 40-2000 Hz
  • resonance frequency fs = 46 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,4 dB (2,83V; 1m)
  • DC resistance Re = 6,23 Ohm
  • force factor BL = 8,32 N/A
  • voice coil inductance L = 0,42 mH
  • effective piston radiating area Sd = 143,1 cm2
  • effective mechanical mass incl. air load mms = 17 g
  • equivalent volume of compliance Vas = 20,09 l
  • total Q factor Qts = 0,39 (Qms=3,12, Qes=0,44)
  • voice coil diameter = 32 mm
  • maximum peak linear excursion vibration xlin = +/- 5,3 mm
  • mounting diameter d = 145,2 mm
  • overall diameter d = 182,3 mm
  • mounting depth (not countersunk) t = 78 mm
  • mass m = 1,58 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 0,29 L volume
from 163/103 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1 L volume bass reflex cabinet
with HP35 reflex tube, 35 cm long.
from 84/66 Hz (-3dB/-8dB).

SLS-85S25CP04-04       order no. ty-SLS-85S25CP04-04       EUR 29,00 excl. VAT: € 24.37 / $ 28.51
9 cm bass driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 70-2000 Hz
  • resonance frequency fs = 73 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86 dB (2,83V; 1m)
  • DC resistance Re = 3,18 Ohm
  • force factor BL = 4,31 N/A
  • voice coil inductance L = 0,16 mH
  • effective piston radiating area Sd = 30,8 cm2
  • effective mechanical mass incl. air load mms = 4,7 g
  • equivalent volume of compliance Vas = 1,39 l
  • total Q factor Qts = 0,35 (Qms=5,38, Qes=0,37)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 75,4 mm
  • overall diameter d = 105 mm
  • mounting depth (not countersunk) t = 69,7 mm
  • mass m = 0,88 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 0,43 L volume
from 145/92 Hz (-3dB/-8dB)
 
recommended cabinet 2:
1,6 L volume bass reflex cabinet
with HP35 reflex tube, 26 cm long.
from 72/58 Hz (-3dB/-8dB).

SLS-85S25CP04-08       order no. ty-SLS-85S25CP04-08       EUR 29,00 excl. VAT: € 24.37 / $ 28.51
9 cm bass driver with paper cone.
  • power handling (continuous/programme) = 25 W
  • frequency range = 70-2000 Hz
  • resonance frequency fs = 74 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 83 dB (2,83V; 1m)
  • DC resistance Re = 6,43 Ohm
  • force factor BL = 5,4 N/A
  • voice coil inductance L = 0,27 mH
  • effective piston radiating area Sd = 30,8 cm2
  • effective mechanical mass incl. air load mms = 4,3 g
  • equivalent volume of compliance Vas = 1,48 l
  • total Q factor Qts = 0,4 (Qms=4,95, Qes=0,44)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 4,5 mm
  • mounting diameter d = 75,4 mm
  • overall diameter d = 105 mm
  • mounting depth (not countersunk) t = 69,7 mm
  • mass m = 0,88 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 1,2 L volume
from 140/88 Hz (-3dB/-8dB)
 
recommended cabinet 2:
3,9 L volume bass reflex cabinet
with HP35 reflex tube, 11 cm long.
from 73/57 Hz (-3dB/-8dB).

NE123W-08       order no. ty-NE123W-08       EUR 128,00 excl. VAT: € 107.56 / $ 125.85
11 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 45 W
  • frequency range = 60-10000 Hz
  • resonance frequency fs = 61 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,27 Ohm
  • force factor BL = 5,53 N/A
  • voice coil inductance L = 0,06 mH
  • effective piston radiating area Sd = 54,1 cm2
  • effective mechanical mass incl. air load mms = 4,7 g
  • equivalent volume of compliance Vas = 5,89 l
  • total Q factor Qts = 0,34 (Qms=4,98, Qes=0,37)
  • voice coil diameter = 32 mm
  • maximum peak linear excursion vibration xlin = +/- 4,2 mm
  • mounting diameter d = 93 mm
  • overall diameter d = 123 mm
  • mounting depth (not countersunk) t = 56,3 mm
  • mass m = 0,41 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 2,1 L volume
from 114/72 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,4 L volume bass reflex cabinet
with HP50 reflex tube, 18 cm long.
from 58/46 Hz (-3dB/-8dB).

NE149W-08 (14NE240/8)       order no. ty-NE149W-08       EUR 188,00 excl. VAT: € 157.98 / $ 184.84
13 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 60 W
  • frequency range = 50-6000 Hz
  • resonance frequency fs = 54 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,33 Ohm
  • force factor BL = 7,42 N/A
  • voice coil inductance L = 0,08 mH
  • effective piston radiating area Sd = 85 cm2
  • effective mechanical mass incl. air load mms = 10,3 g
  • equivalent volume of compliance Vas = 8,54 l
  • total Q factor Qts = 0,38 (Qms=8,19, Qes=0,4)
  • voice coil diameter = 38,44 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 115,7 mm
  • overall diameter d = 149 mm
  • mounting depth (not countersunk) t = 81 mm
  • mass m = 0,68 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 5,9 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
21 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 43/35 Hz (-3dB/-8dB).

NE180W-08       order no. ty-NE180W-08       EUR 189,00 excl. VAT: € 158.82 / $ 185.82
16 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 80 W
  • frequency range = 40-2000 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,24 Ohm
  • force factor BL = 8,17 N/A
  • voice coil inductance L = 0,12 mH
  • effective piston radiating area Sd = 136,9 cm2
  • effective mechanical mass incl. air load mms = 16,4 g
  • equivalent volume of compliance Vas = 22,72 l
  • total Q factor Qts = 0,39 (Qms=7,41, Qes=0,41)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 148,5 mm
  • overall diameter d = 179,8 mm
  • mounting depth (not countersunk) t = 82,3 mm
  • mass m = 2,08 kg
PDF data sheet

show kits to this chassis hide kits

BC18WG59-04       order no. ty-BC18WG59-04       EUR 39,00 excl. VAT: € 32.77 / $ 38.34
16 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 30 W
  • frequency range = 50-3000 Hz
  • resonance frequency fs = 56 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 3,02 Ohm
  • force factor BL = 4,23 N/A
  • voice coil inductance L = 0,16 mH
  • effective piston radiating area Sd = 138,9 cm2
  • effective mechanical mass incl. air load mms = 12,4 g
  • equivalent volume of compliance Vas = 17,53 l
  • total Q factor Qts = 0,6 (Qms=3,04, Qes=0,74)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 3,8 mm
  • mounting diameter d = 147 mm
  • overall diameter d = 180 mm
  • mounting depth (not countersunk) t = 66,6 mm
  • mass m = 0,7 kg
PDF data sheet

show kits to this chassis hide kits

GBS-135F25AL02-04       order no. ty-GBS-135F25AL02-04       EUR 49,00 excl. VAT: € 41.18 / $ 48.18
14 cm bass-midrange driver with aluminium cone.
  • power handling (continuous/programme) = 35 W
  • frequency range = 60-2000 Hz
  • resonance frequency fs = 63 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 3,28 Ohm
  • force factor BL = 4,91 N/A
  • voice coil inductance L = 0,21 mH
  • effective piston radiating area Sd = 85,7 cm2
  • effective mechanical mass incl. air load mms = 12,3 g
  • equivalent volume of compliance Vas = 5,35 l
  • total Q factor Qts = 0,57 (Qms=4,12, Qes=0,66)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 3,3 mm
  • mounting diameter d = 119 mm
  • overall diameter d = 152 mm
  • mounting depth (not countersunk) t = 27,4 mm
  • mass m = 0,8 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 2,2 L volume
from 185/117 Hz (-3dB/-8dB)
 
recommended cabinet 2:
9,1 L volume bass reflex cabinet
with HP70 reflex tube, 8 cm long.
from 87/73 Hz (-3dB/-8dB).

FSL-0512R01-08       order no. ty-FSL-0512R01-08       EUR 34,00 excl. VAT: € 28.57 / $ 33.43
14 cm midrange driver with paper cone.
  • power handling (continuous/programme) = 90 W
  • frequency range = 100-5000 Hz
  • resonance frequency fs = 108 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,4 dB (2,83V; 1m)
  • DC resistance Re = 5,71 Ohm
  • force factor BL = 6,23 N/A
  • voice coil inductance L = 0,23 mH
  • effective piston radiating area Sd = 105,7 cm2
  • effective mechanical mass incl. air load mms = 6,5 g
  • equivalent volume of compliance Vas = 5,23 l
  • total Q factor Qts = 0,47 (Qms=1,65, Qes=0,65)
  • voice coil diameter = 30 mm
  • maximum peak linear excursion vibration xlin = +/- 3,9 mm
  • mounting diameter d = 125 mm
  • overall diameter d = 150 mm
  • mounting depth (not countersunk) t = 61,5 mm
  • mass m = 0,94 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 3,4 L volume
from 157/99 Hz (-3dB/-8dB)
 
recommended cabinet 2:
12,9 L volume bass reflex cabinet
with HP70 reflex tube, 8 cm long.
from 77/62 Hz (-3dB/-8dB).

FSL-0615R02-08       order no. ty-FSL-0615R02-08       EUR 38,00 excl. VAT: € 31.93 / $ 37.36
16 cm bass-midrange driver with paper cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 80-3000 Hz
  • resonance frequency fs = 79,8 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 93,6 dB (2,83V; 1m)
  • DC resistance Re = 5,14 Ohm
  • force factor BL = 7,37 N/A
  • voice coil inductance L = 0,34 mH
  • effective piston radiating area Sd = 143,1 cm2
  • effective mechanical mass incl. air load mms = 9,9 g
  • equivalent volume of compliance Vas = 11,61 l
  • total Q factor Qts = 0,41 (Qms=2,95, Qes=0,47)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 2,6 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 174,2 mm
  • mounting depth (not countersunk) t = 76,7 mm
  • mass m = 1,48 kg
PDF data sheet

show kits to this chassis hide kits


 

Subwoofer


open a bigger photo

recommended cabinet 1:
closed cabinet with 2,5 L volume
from 91/57 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,9 L volume bass reflex cabinet
with HP50 reflex tube, 25 cm long.
from 47/37 Hz (-3dB/-8dB).

SLS-P830946 (SLS W 6-39/04)       order no. ty-SLS-P830946       EUR 74,00 excl. VAT: € 62.18 / $ 72.76
17 cm bass driver with paper cone.
  • power handling (continuous/programme) = 75 W
  • frequency range = 40-500 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 86,7 dB (2,83V; 1m)
  • DC resistance Re = 2,73 Ohm
  • force factor BL = 7,6 N/A
  • voice coil inductance L = 0,65 mH
  • effective piston radiating area Sd = 123,5 cm2
  • effective mechanical mass incl. air load mms = 30,5 g
  • equivalent volume of compliance Vas = 11,2 l
  • total Q factor Qts = 0,35 (Qms=4,92, Qes=0,38)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 8,2 mm
  • mounting diameter d = 146 mm
  • overall diameter d = 182 mm
  • mounting depth (not countersunk) t = 83 mm
  • mass m = 2,4 kg
PDF data sheet

show kits to this chassis hide kits

SLS-P830667 (SLS 8-39/08)       order no. ty-SLS-P830667       EUR 79,00 excl. VAT: € 66.39 / $ 77.67
20 cm bass driver with paper cone.
  • power handling (continuous/programme) = 90 W
  • frequency range = 30-800 Hz
  • resonance frequency fs = 42 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,7 dB (2,83V; 1m)
  • DC resistance Re = 5,53 Ohm
  • force factor BL = 8,26 N/A
  • voice coil inductance L = 0,78 mH
  • effective piston radiating area Sd = 213,8 cm2
  • effective mechanical mass incl. air load mms = 34,8 g
  • equivalent volume of compliance Vas = 26,27 l
  • total Q factor Qts = 0,66 (Qms=5,73, Qes=0,75)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 8,4 mm
  • mounting diameter d = 177 mm
  • overall diameter d = 213 mm
  • mounting depth (not countersunk) t = 101,2 mm
  • mass m = 2,52 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 52 L volume
from 48/30 Hz (-3dB/-8dB)
 
recommended cabinet 2:
211 L volume bass reflex cabinet
with HP100 reflex tube, 11 cm long.
from 22/19 Hz (-3dB/-8dB).

SLS-P830668 (SLS 10-39/08)       order no. ty-SLS-P830668       EUR 98,00 excl. VAT: € 82.35 / $ 96.35
24 cm bass driver with paper cone.
  • power handling (continuous/programme) = 70 W
  • frequency range = 30-1000 Hz
  • resonance frequency fs = 32,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,9 dB (2,83V; 1m)
  • DC resistance Re = 5,61 Ohm
  • force factor BL = 10,42 N/A
  • voice coil inductance L = 1,37 mH
  • effective piston radiating area Sd = 346,4 cm2
  • effective mechanical mass incl. air load mms = 56,3 g
  • equivalent volume of compliance Vas = 72,9 l
  • total Q factor Qts = 0,55 (Qms=7,15, Qes=0,59)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 8,3 mm
  • mounting diameter d = 223 mm
  • overall diameter d = 262,3 mm
  • mounting depth (not countersunk) t = 126,3 mm
  • mass m = 2,7 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 89 L volume
from 47/30 Hz (-3dB/-8dB)
 
recommended cabinet 2:
362 L volume bass reflex cabinet
with 2x HP100 reflex tube, 10 cm long.
from 21/18 Hz (-3dB/-8dB).

SLS-P830669 (SLS 12-39/08)       order no. ty-SLS-P830669       EUR 108,00 excl. VAT: € 90.76 / $ 106.18
30 cm bass driver with paper cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 30-1000 Hz
  • resonance frequency fs = 31,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 11,88 N/A
  • voice coil inductance L = 1,12 mH
  • effective piston radiating area Sd = 522,8 cm2
  • effective mechanical mass incl. air load mms = 74,1 g
  • equivalent volume of compliance Vas = 132,42 l
  • total Q factor Qts = 0,54 (Qms=7,07, Qes=0,58)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 8,3 mm
  • mounting diameter d = 277 mm
  • overall diameter d = 314 mm
  • mounting depth (not countersunk) t = 139,8 mm
  • mass m = 3,24 kg
PDF data sheet

show kits to this chassis hide kits

SBS-200F35AL01-04       order no. ty-SBS-200F35AL01-04       EUR 89,00 excl. VAT: € 74.79 / $ 87.50
$dd cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 30-500 Hz
  • resonance frequency fs = 44 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 84,1 dB (2,83V; 1m)
  • DC resistance Re = 3,97 Ohm
  • force factor BL = 10 N/A
  • voice coil inductance L = 0,96 mH
  • effective piston radiating area Sd = 213,8 cm2
  • effective mechanical mass incl. air load mms = 70,4 g
  • equivalent volume of compliance Vas = 11,78 l
  • total Q factor Qts = 0,7 (Qms=6,38, Qes=0,78)
  • voice coil diameter = 35,55 mm
  • maximum peak linear excursion vibration xlin = +/- 9,1 mm
  • overall diameter d = 225 mm
  • mounting depth (not countersunk) t = 113,6 mm
  • mass m = 2,18 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 14,7 L volume
from 51/32 Hz (-3dB/-8dB)
 
recommended cabinet 2:
60 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 24/20 Hz (-3dB/-8dB).

SBS-250F38AL01-04       order no. ty-SBS-250F38AL01-04       EUR 144,00 excl. VAT: € 121.01 / $ 141.58
25 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 250 W
  • frequency range = 30-500 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 85,2 dB (2,83V; 1m)
  • DC resistance Re = 2,1 Ohm
  • force factor BL = 9,9 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 314,2 cm2
  • effective mechanical mass incl. air load mms = 126,12 g
  • equivalent volume of compliance Vas = 24,9 l
  • total Q factor Qts = 0,49 (Qms=4,2, Qes=0,56)
  • voice coil diameter = 38,75 mm
  • maximum peak linear excursion vibration xlin = +/- 7,4 mm
  • mounting diameter d = 232 mm
  • overall diameter d = 261 mm
  • mounting depth (not countersunk) t = 133,8 mm
  • mass m = 3,16 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 16 L volume
from 55/35 Hz (-3dB/-8dB)
 
recommended cabinet 2:
57 L volume bass reflex cabinet
with HP70 reflex tube, 19 cm long.
from 28/22 Hz (-3dB/-8dB).

XXLS-P835016 (XXLS-WAL 10/04)       order no. ty-XXLS-P835016       EUR 248,00 excl. VAT: € 208.40 / $ 243.83
25 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 100 W
  • frequency range = 25-800 Hz
  • resonance frequency fs = 26 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 2,46 Ohm
  • force factor BL = 10,36 N/A
  • voice coil inductance L = 0,51 mH
  • effective piston radiating area Sd = 356,3 cm2
  • effective mechanical mass incl. air load mms = 102,1 g
  • equivalent volume of compliance Vas = 65 l
  • total Q factor Qts = 0,37 (Qms=11,27, Qes=0,38)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 12,3 mm
  • mounting diameter d = 239 mm
  • overall diameter d = 269,2 mm
  • mounting depth (not countersunk) t = 135,1 mm
  • mass m = 6,14 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 37 L volume
from 43/27 Hz (-3dB/-8dB)
 
recommended cabinet 2:
140 L volume bass reflex cabinet
with HP100 reflex tube, 26 cm long.
from 22/17 Hz (-3dB/-8dB).

XXLS-P835017 (XXLS-WAL 12/04)       order no. ty-XXLS-P835017       EUR 288,00 excl. VAT: € 242.02 / $ 283.16
29 cm bass driver with aluminium cone.
  • power handling (continuous/programme) = 120 W
  • frequency range = 20-800 Hz
  • resonance frequency fs = 21,6 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88,6 dB (2,83V; 1m)
  • DC resistance Re = 2,51 Ohm
  • force factor BL = 10,58 N/A
  • voice coil inductance L = 0,53 mH
  • effective piston radiating area Sd = 483,1 cm2
  • effective mechanical mass incl. air load mms = 131,4 g
  • equivalent volume of compliance Vas = 136 l
  • total Q factor Qts = 0,39 (Qms=10,83, Qes=0,4)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 12,3 mm
  • mounting diameter d = 277 mm
  • overall diameter d = 307,9 mm
  • mounting depth (not countersunk) t = 144 mm
  • mass m = 6,4 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 8,6 L volume
from 78/49 Hz (-3dB/-8dB)
 
recommended cabinet 2:
28 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 41/32 Hz (-3dB/-8dB).

NE225W-08       order no. ty-NE225W-08       EUR 295,00 excl. VAT: € 247.90 / $ 290.04
21 cm bass driver with paper cone.
  • power handling (continuous/programme) = 160 W
  • frequency range = 30-15000 Hz
  • resonance frequency fs = 32 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,6 dB (2,83V; 1m)
  • DC resistance Re = 6,32 Ohm
  • force factor BL = 11,52 N/A
  • voice coil inductance L = 0,21 mH
  • effective piston radiating area Sd = 227 cm2
  • effective mechanical mass incl. air load mms = 35,9 g
  • equivalent volume of compliance Vas = 50,16 l
  • total Q factor Qts = 0,33 (Qms=8,84, Qes=0,34)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 7,7 mm
  • mounting diameter d = 187 mm
  • overall diameter d = 225 mm
  • mounting depth (not countersunk) t = 107 mm
  • mass m = 1,84 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 10,8 L volume
from 59/37 Hz (-3dB/-8dB)
 
recommended cabinet 2:
33 L volume bass reflex cabinet
with HP70 reflex tube, 31 cm long.
from 32/25 Hz (-3dB/-8dB).

NE265W-04       order no. ty-NE265W-04       EUR 339,00 excl. VAT: € 284.87 / $ 333.30
25 cm bass driver with paper cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 20-800 Hz
  • resonance frequency fs = 23 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 2,86 Ohm
  • force factor BL = 11,74 N/A
  • voice coil inductance L = 0,4 mH
  • effective piston radiating area Sd = 330,1 cm2
  • effective mechanical mass incl. air load mms = 98,2 g
  • equivalent volume of compliance Vas = 72,83 l
  • total Q factor Qts = 0,29 (Qms=13,77, Qes=0,3)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 235 mm
  • overall diameter d = 265 mm
  • mounting depth (not countersunk) t = 125,5 mm
  • mass m = 2,24 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 13,4 L volume
from 61/39 Hz (-3dB/-8dB)
 
recommended cabinet 2:
39 L volume bass reflex cabinet
with HP70 reflex tube, 23 cm long.
from 34/26 Hz (-3dB/-8dB).

NE265W-08       order no. ty-NE265W-08       EUR 339,00 excl. VAT: € 284.87 / $ 333.30
25 cm bass driver with paper cone.
  • power handling (continuous/programme) = 190 W
  • frequency range = 20-800 Hz
  • resonance frequency fs = 23 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 85 dB (2,83V; 1m)
  • DC resistance Re = 6,24 Ohm
  • force factor BL = 14,7 N/A
  • voice coil inductance L = 0,53 mH
  • effective piston radiating area Sd = 326,9 cm2
  • effective mechanical mass incl. air load mms = 74,1 g
  • equivalent volume of compliance Vas = 97,21 l
  • total Q factor Qts = 0,3 (Qms=10,33, Qes=0,31)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 9,4 mm
  • mounting diameter d = 235 mm
  • overall diameter d = 265 mm
  • mounting depth (not countersunk) t = 125,5 mm
  • mass m = 2,27 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 35 L volume
from 48/31 Hz (-3dB/-8dB)
 
recommended cabinet 2:
111 L volume bass reflex cabinet
with HP100 reflex tube, 27 cm long.
from 26/20 Hz (-3dB/-8dB).

NE315W-04       order no. ty-NE315W-04       EUR 390,00 excl. VAT: € 327.73 / $ 383.45
30 cm bass driver with paper cone.
  • power handling (continuous/programme) = 150 W
  • frequency range = 20-800 Hz
  • resonance frequency fs = 20 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88,6 dB (2,83V; 1m)
  • DC resistance Re = 2,78 Ohm
  • force factor BL = 11,12 N/A
  • voice coil inductance L = 0,38 mH
  • effective piston radiating area Sd = 506,7 cm2
  • effective mechanical mass incl. air load mms = 113,9 g
  • equivalent volume of compliance Vas = 201,66 l
  • total Q factor Qts = 0,31 (Qms=15,6, Qes=0,32)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 288 mm
  • overall diameter d = 315 mm
  • mounting depth (not countersunk) t = 142,5 mm
  • mass m = 2,68 kg
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 10,3 L volume
from 65/41 Hz (-3dB/-8dB)
 
recommended cabinet 2:
42 L volume bass reflex cabinet
with HP70 reflex tube, 18 cm long.
from 31/26 Hz (-3dB/-8dB).

GBS-250F38CP01-04       order no. ty-GBS-250F38CP01-04       EUR 149,00 excl. VAT: € 125.21 / $ 146.50
25 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 200 W
  • frequency range = 35-200 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,45 Ohm
  • force factor BL = 13,11 N/A
  • voice coil inductance L = 3,45 mH
  • effective piston radiating area Sd = 314,2 cm2
  • effective mechanical mass incl. air load mms = 103,4 g
  • equivalent volume of compliance Vas = 23,92 l
  • total Q factor Qts = 0,45 (Qms=5,62, Qes=0,49)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 6 mm
  • mounting diameter d = 228 mm
  • overall diameter d = 264 mm
  • mounting depth (not countersunk) t = 40,3 mm
  • mass m = 3,24 kg
PDF data sheet

show kits to this chassis hide kits


 

no longer sold

Vifa XT 300 VS/4 (Paarweise selektiert)       order no. A-XT300VS-4sel       EUR 248,00 excl. VAT: € 208.40 / $ 243.83
25 mm tweeter with high quality cone. A pair of speakers is delivered (the price is for one pair). The driver is magnetically shielded. The magnet system is based on Neodymium technology. The speaker has a 5 mm solid metal front plate.
  • power handling (continuous/programme) = 140/400 W
  • frequency range = 1500-40000 Hz
  • resonance frequency fs = 500 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 87,5 dB (2,83V; 1m)
  • DC resistance Re = 3 Ohm
  • force factor BL = 2,2 N/A
  • effective piston radiating area Sd = 6 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 0,38 (Qms=2,5, Qes=0,45)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,5 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104,2 mm
  • mounting depth (not countersunk) t = 51 mm
  • mass m = 0,8 kg
PDF data sheet

show kits to this chassis hide kits

H26TG-35-06       order no. ty-H26TG-35-06       - not available
25 mm tweeter with fabric cone. Voice coil windings immersed in magnetic fluid increase short term power handling capacity.
  • power handling (continuous/programme) = 100 W
  • frequency range = 2500-20000 Hz
  • resonance frequency fs = 832 Hz
  • impedance R = 6 Ohm
  • sound pressure level SPL = 95 dB (2,83V; 1m)
  • DC resistance Re = 3,9 Ohm
  • force factor BL = 2,88 N/A
  • voice coil inductance L = 0,03 mH
  • effective piston radiating area Sd = 7,1 cm2
  • effective mechanical mass incl. air load mms = 0,21 g
  • total Q factor Qts = 0,28 (Qms=0,6, Qes=0,51)
  • voice coil diameter = 25 mm
  • maximum peak linear excursion vibration xlin = +/- 0,45 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 104 mm
  • mounting depth (not countersunk) t = 56,3 mm
  • mass m = 0,52 kg
PDF data sheet

show kits to this chassis hide kits

NDT-53       order no. not-available       - not available
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 80/100 W
  • frequency range = > 3000 Hz
  • resonance frequency fs = 1330 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 2 N/A
  • voice coil inductance L = 0,1 mH
  • effective piston radiating area Sd = 6,2 cm2
  • effective mechanical mass incl. air load mms = 0,3 g
  • total Q factor Qts = 1,55 (Qms=2,7, Qes=3,66)
  • voice coil diameter = 26 mm
  • mounting diameter d = 48 mm
  • overall diameter d = 52,8 mm
  • mounting depth (not countersunk) t = 15 mm

show kits to this chassis hide kits

PH-25/8       order no. not-available       - not available
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 70/90 W
  • frequency range = > 3000 Hz
  • resonance frequency fs = 1075 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 6,9 Ohm
  • force factor BL = 1,8 N/A
  • voice coil inductance L = 0,1 mH
  • effective piston radiating area Sd = 6,2 cm2
  • effective mechanical mass incl. air load mms = 0,26 g
  • total Q factor Qts = 2,21 (Qms=6,18, Qes=3,45)
  • voice coil diameter = 26 mm
  • mounting diameter d = 62 mm
  • overall diameter d = 80 mm
  • mounting depth (not countersunk) t = 19,5 mm

show kits to this chassis hide kits

KO-10/8       order no. not-available       - not available
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 70/90 W
  • frequency range = > 2500 Hz
  • resonance frequency fs = 1056 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91,5 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • force factor BL = 3,1 N/A
  • voice coil inductance L = 0,1 mH
  • effective piston radiating area Sd = 6,2 cm2
  • effective mechanical mass incl. air load mms = 0,24 g
  • total Q factor Qts = 0,89 (Qms=4,16, Qes=1,13)
  • voice coil diameter = 26 mm
  • mounting diameter d = 72 mm
  • overall diameter d = 114,5 mm
  • mounting depth (not countersunk) t = 22,3 mm

show kits to this chassis hide kits

WA-10/8       order no. not-available       - not available
26 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 100/120 W
  • frequency range = > 2500 Hz
  • resonance frequency fs = 860 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 93 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 3,5 N/A
  • voice coil inductance L = 0,1 mH
  • effective piston radiating area Sd = 6,2 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • total Q factor Qts = 0,77 (Qms=4,31, Qes=0,94)
  • voice coil diameter = 26 mm
  • mounting diameter d = 79 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 27,5 mm

show kits to this chassis hide kits

SR-10       order no. not-available       - not available
26 mm tweeter with fabric cone.
  • power handling (continuous/programme) = 80/120 W
  • frequency range = > 2500 Hz
  • resonance frequency fs = 1006 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 92 dB (2,83V; 1m)
  • DC resistance Re = 7 Ohm
  • force factor BL = 3,3 N/A
  • voice coil inductance L = 0,1 mH
  • effective piston radiating area Sd = 6,2 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • total Q factor Qts = 0,96 (Qms=4,72, Qes=1,21)
  • voice coil diameter = 26 mm
  • mounting diameter d = 79 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 27,5 mm

show kits to this chassis hide kits

PHH-25/8       order no. not-available       - not available
26 mm tweeter with high quality cone.
  • power handling (continuous/programme) = 80/120 W
  • frequency range = > 3000 Hz
  • resonance frequency fs = 1040 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 99 dB (2,83V; 1m)
  • DC resistance Re = 6,8 Ohm
  • force factor BL = 3,3 N/A
  • voice coil inductance L = 0,1 mH
  • effective piston radiating area Sd = 6,2 cm2
  • effective mechanical mass incl. air load mms = 0,33 g
  • total Q factor Qts = 0,87 (Qms=5,16, Qes=1,04)
  • voice coil diameter = 26 mm
  • mounting diameter d = 80 mm
  • overall diameter d = 100 mm
  • mounting depth (not countersunk) t = 76,5 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 0,76 L volume
from 145/92 Hz (-3dB/-8dB)
 
recommended cabinet 2:
3 L volume bass reflex cabinet
with HP35 reflex tube, 13 cm long.
from 70/57 Hz (-3dB/-8dB).

HDS Exclusive 106 (830881)       order no. not-available       - not available
11 cm midrange driver with high quality cone.
  • frequency range = 90-4000 Hz
  • resonance frequency fs = 81,2 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 84 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 6,4 N/A
  • voice coil inductance L = 1 mH
  • effective piston radiating area Sd = 53 cm2
  • effective mechanical mass incl. air load mms = 7,4 g
  • equivalent volume of compliance Vas = 2 l
  • total Q factor Qts = 0,44 (Qms=2,31, Qes=0,55)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 95 mm
  • overall diameter d = 120,8 mm
  • mounting depth (not countersunk) t = 56,5 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 1,1 L volume
from 139/87 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,4 L volume bass reflex cabinet
with HP35 reflex tube, 9 cm long.
from 67/55 Hz (-3dB/-8dB).

CSC-116G       order no. not-available       - not available
10 cm bass driver with sandwich cone.
  • power handling (continuous/programme) = 50/80 W
  • frequency range = 60-5000 Hz
  • resonance frequency fs = 74 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,7 dB (2,83V; 1m)
  • DC resistance Re = 5,6 Ohm
  • force factor BL = 5,6 N/A
  • voice coil inductance L = 0,9 mH
  • effective piston radiating area Sd = 58 cm2
  • effective mechanical mass incl. air load mms = 6,2 g
  • equivalent volume of compliance Vas = 3,4 l
  • total Q factor Qts = 0,43 (Qms=2,4, Qes=0,52)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 1,5 mm
  • mounting diameter d = 93 mm
  • overall diameter d = 116 mm
  • mounting depth (not countersunk) t = 53,5 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 1,4 L volume
from 130/82 Hz (-3dB/-8dB)
 
recommended cabinet 2:
5,6 L volume bass reflex cabinet
with HP35 reflex tube, 8 cm long.
from 61/51 Hz (-3dB/-8dB).

HDS 106 PPB shielded (830854)       order no. not-available       - not available
11 cm midrange driver with polypropylene cone.
  • frequency range = 80-4500 Hz
  • resonance frequency fs = 75,7 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,8 dB (2,83V; 1m)
  • DC resistance Re = 5,3 Ohm
  • force factor BL = 5,1 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 55 cm2
  • effective mechanical mass incl. air load mms = 5,9 g
  • equivalent volume of compliance Vas = 3,2 l
  • total Q factor Qts = 0,46 (Qms=2,66, Qes=0,56)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3 mm
  • mounting diameter d = 95 mm
  • overall diameter d = 120,8 mm
  • mounting depth (not countersunk) t = 71 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 2 L volume
from 133/84 Hz (-3dB/-8dB)
 
recommended cabinet 2:
7,5 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 66/53 Hz (-3dB/-8dB).

PT 145 TV       order no. not-available       - not available
13 cm bass driver with polypropylene cone.
  • power handling (continuous/programme) = 80/100 W
  • frequency range = 60-4000 Hz
  • resonance frequency fs = 68 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,5 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 6,3 N/A
  • voice coil inductance L = 1,1 mH
  • effective piston radiating area Sd = 85 cm2
  • effective mechanical mass incl. air load mms = 7,9 g
  • equivalent volume of compliance Vas = 6,7 l
  • total Q factor Qts = 0,41 (Qms=1,9, Qes=0,52)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 2 mm
  • mounting diameter d = 115 mm
  • overall diameter d = 145 mm
  • mounting depth (not countersunk) t = 73 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 1,9 L volume
from 133/84 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 67/53 Hz (-3dB/-8dB).

HDS Exclusive 152 (830882)       order no. not-available       - not available
14 cm midrange driver with high quality cone.
  • frequency range = 60-2500 Hz
  • resonance frequency fs = 64,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,2 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 7 N/A
  • voice coil inductance L = 0,8 mH
  • effective piston radiating area Sd = 87 cm2
  • effective mechanical mass incl. air load mms = 8,8 g
  • equivalent volume of compliance Vas = 7,2 l
  • total Q factor Qts = 0,39 (Qms=3,85, Qes=0,43)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 120,3 mm
  • overall diameter d = 152,3 mm
  • mounting depth (not countersunk) t = 65,5 mm
PDF data sheet

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 1,9 L volume
from 133/84 Hz (-3dB/-8dB)
 
recommended cabinet 2:
6,8 L volume bass reflex cabinet
with HP50 reflex tube, 14 cm long.
from 67/53 Hz (-3dB/-8dB).

HDS E 5-25/08 (831882)       order no. not-available       - not available
14 cm midrange driver with paper cone.
  • frequency range = 50-6000 Hz
  • resonance frequency fs = 64,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,2 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 7 N/A
  • voice coil inductance L = 0,8 mH
  • effective piston radiating area Sd = 87 cm2
  • effective mechanical mass incl. air load mms = 8,8 g
  • equivalent volume of compliance Vas = 7,2 l
  • total Q factor Qts = 0,39 (Qms=3,85, Qes=0,43)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 3,5 mm
  • mounting diameter d = 120,3 mm
  • overall diameter d = 152,3 mm
  • mounting depth (not countersunk) t = 61,3 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 1,4 L volume
from 139/88 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,6 L volume bass reflex cabinet
with HP50 reflex tube, 20 cm long.
from 73/57 Hz (-3dB/-8dB).

HDS-134       order no. not-available       - not available
14 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 100/140 W
  • frequency range = xxx-3000 Hz
  • resonance frequency fs = 59 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 7,4 N/A
  • voice coil inductance L = 0,4 mH
  • effective piston radiating area Sd = 91 cm2
  • effective mechanical mass incl. air load mms = 10,8 g
  • equivalent volume of compliance Vas = 7,6 l
  • total Q factor Qts = 0,34 (Qms=2,07, Qes=0,41)
  • voice coil diameter = 26 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 120 mm
  • overall diameter d = 152 mm
  • mounting depth (not countersunk) t = 60 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 2,2 L volume
from 146/92 Hz (-3dB/-8dB)
 
recommended cabinet 2:
8,5 L volume bass reflex cabinet
with HP70 reflex tube, 17 cm long.
from 71/58 Hz (-3dB/-8dB).

Sub176SD       order no. not-available       - not available
16 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 100/140 W
  • frequency range = 60-3000 Hz
  • resonance frequency fs = 76 Hz
  • impedance R = 4 Ohm
  • sound pressure level SPL = 88 dB (2,83V; 1m)
  • DC resistance Re = 3,5 Ohm
  • force factor BL = 6,8 N/A
  • voice coil inductance L = 0,6 mH
  • effective piston radiating area Sd = 143 cm2
  • effective mechanical mass incl. air load mms = 17,6 g
  • equivalent volume of compliance Vas = 7,1 l
  • total Q factor Qts = 0,42 (Qms=0,64, Qes=1,26)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 142 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 81 mm

show kits to this chassis hide kits


open a bigger photo

recommended cabinet 1:
closed cabinet with 3,9 L volume
from 100/63 Hz (-3dB/-8dB)
 
recommended cabinet 2:
13,6 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 52/41 Hz (-3dB/-8dB).

HDS-182       order no. not-available       - not available
17 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150/200 W
  • frequency range = < 3000 Hz
  • resonance frequency fs = 44,9 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87,6 dB (2,83V; 1m)
  • DC resistance Re = 6,2 Ohm
  • force factor BL = 8,9 N/A
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 143 cm2
  • effective mechanical mass incl. air load mms = 18,9 g
  • equivalent volume of compliance Vas = 18,7 l
  • total Q factor Qts = 0,35 (Qms=2,28, Qes=0,42)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 183 mm
  • mounting depth (not countersunk) t = 78 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 9,3 L volume
from 71/45 Hz (-3dB/-8dB)
 
recommended cabinet 2:
36 L volume bass reflex cabinet
with HP70 reflex tube, 17 cm long.
from 35/28 Hz (-3dB/-8dB).

CSX-176T       order no. not-available       - not available
16 cm bass driver with sandwich cone.
  • power handling (continuous/programme) = 80/120 W
  • frequency range = 35-3000 Hz
  • resonance frequency fs = 38 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,5 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 7 N/A
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 143 cm2
  • effective mechanical mass incl. air load mms = 17,8 g
  • equivalent volume of compliance Vas = 28 l
  • total Q factor Qts = 0,43 (Qms=2,22, Qes=0,53)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 142 mm
  • overall diameter d = 176 mm
  • mounting depth (not countersunk) t = 77 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 4,3 L volume
from 91/58 Hz (-3dB/-8dB)
 
recommended cabinet 2:
16 L volume bass reflex cabinet
with HP50 reflex tube, 12 cm long.
from 46/37 Hz (-3dB/-8dB).

HDS-182PP       order no. not-available       - not available
17 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150/200 W
  • frequency range = xxx-3000 Hz
  • resonance frequency fs = 44,3 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 86,3 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 8,5 N/A
  • voice coil inductance L = 1,4 mH
  • effective piston radiating area Sd = 134 cm2
  • effective mechanical mass incl. air load mms = 19,3 g
  • equivalent volume of compliance Vas = 16,6 l
  • total Q factor Qts = 0,39 (Qms=2,33, Qes=0,47)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 183 mm
  • mounting depth (not countersunk) t = 78 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 4,9 L volume
from 96/60 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP70 reflex tube, 18 cm long.
from 47/38 Hz (-3dB/-8dB).

HDS-182 TV       order no. not-available       - not available
17 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 150/200 W
  • frequency range = xxx-2500 Hz
  • resonance frequency fs = 50 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 6,3 Ohm
  • force factor BL = 8,4 N/A
  • voice coil inductance L = 1,2 mH
  • effective piston radiating area Sd = 143 cm2
  • effective mechanical mass incl. air load mms = 18,2 g
  • equivalent volume of compliance Vas = 15,7 l
  • total Q factor Qts = 0,42 (Qms=2,3, Qes=0,51)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 145 mm
  • overall diameter d = 183 mm
  • mounting depth (not countersunk) t = 78 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 17 L volume
from 65/41 Hz (-3dB/-8dB)
 
recommended cabinet 2:
65 L volume bass reflex cabinet
with HP100 reflex tube, 25 cm long.
from 32/26 Hz (-3dB/-8dB).

HDS 205 PPB (830868)       order no. not-available       - not available
21 cm bass driver with polypropylene cone.
  • frequency range = 35-1800 Hz
  • resonance frequency fs = 32,5 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90,1 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 8,1 N/A
  • voice coil inductance L = 1,5 mH
  • effective piston radiating area Sd = 221 cm2
  • effective mechanical mass incl. air load mms = 25,6 g
  • equivalent volume of compliance Vas = 63,4 l
  • total Q factor Qts = 0,4 (Qms=4,09, Qes=0,44)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 190 mm
  • overall diameter d = 225,2 mm
  • mounting depth (not countersunk) t = 94 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 18 L volume
from 67/42 Hz (-3dB/-8dB)
 
recommended cabinet 2:
65 L volume bass reflex cabinet
with HP100 reflex tube, 23 cm long.
from 33/27 Hz (-3dB/-8dB).

HDS Exclusive 205 (830884)       order no. not-available       - not available
21 cm bass driver with high quality cone.
  • frequency range = 40-2000 Hz
  • resonance frequency fs = 32,4 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,3 dB (2,83V; 1m)
  • DC resistance Re = 5,8 Ohm
  • force factor BL = 8 N/A
  • voice coil inductance L = 1,4 mH
  • effective piston radiating area Sd = 221 cm2
  • effective mechanical mass incl. air load mms = 23,7 g
  • equivalent volume of compliance Vas = 68,8 l
  • total Q factor Qts = 0,38 (Qms=3, Qes=0,44)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 190 mm
  • overall diameter d = 225,2 mm
  • mounting depth (not countersunk) t = 94 mm
PDF data sheet

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 8,7 L volume
from 82/52 Hz (-3dB/-8dB)
 
recommended cabinet 2:
23 L volume bass reflex cabinet
with HP70 reflex tube, 22 cm long.
from 48/36 Hz (-3dB/-8dB).

CSX-217T       order no. not-available       - not available
20 cm bass driver with sandwich cone.
  • power handling (continuous/programme) = 100/140 W
  • frequency range = 30-1500 Hz
  • resonance frequency fs = 28 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,5 dB (2,83V; 1m)
  • DC resistance Re = 5,9 Ohm
  • force factor BL = 10,4 N/A
  • voice coil inductance L = 2,6 mH
  • effective piston radiating area Sd = 235 cm2
  • effective mechanical mass incl. air load mms = 30,5 g
  • equivalent volume of compliance Vas = 80 l
  • total Q factor Qts = 0,27 (Qms=3,5, Qes=0,29)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 184 mm
  • overall diameter d = 217 mm
  • mounting depth (not countersunk) t = 91 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 18 L volume
from 49/31 Hz (-3dB/-8dB)
 
recommended cabinet 2:
66 L volume bass reflex cabinet
with HP70 reflex tube, 20 cm long.
from 25/20 Hz (-3dB/-8dB).

CCS-220/8       order no. not-available       - not available
20 cm bass driver with polypropylene cone.
  • power handling (continuous/programme) = 100/140 W
  • frequency range = 25-600 Hz
  • resonance frequency fs = 24 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 8+8 Ohm
  • force factor BL = 8,1 N/A
  • voice coil inductance L = 1,4 mH
  • effective piston radiating area Sd = 225 cm2
  • effective mechanical mass incl. air load mms = 47,6 g
  • equivalent volume of compliance Vas = 70 l
  • total Q factor Qts = 0,38 (Qms=3,66, Qes=0,43)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 7,5 mm
  • mounting diameter d = 184 mm
  • overall diameter d = 220,5 mm
  • mounting depth (not countersunk) t = 97 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 70 L volume
from 41/26 Hz (-3dB/-8dB)
 
recommended cabinet 2:
270 L volume bass reflex cabinet
with HP100 reflex tube, 12 cm long.
from 18/16 Hz (-3dB/-8dB).

CSC-217R       order no. not-available       - not available
20 cm bass driver with sandwich cone.
  • power handling (continuous/programme) = 90/120 W
  • frequency range = 35-2000 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 6,7 N/A
  • voice coil inductance L = 2 mH
  • effective piston radiating area Sd = 235 cm2
  • effective mechanical mass incl. air load mms = 28,9 g
  • equivalent volume of compliance Vas = 74 l
  • total Q factor Qts = 0,58 (Qms=4,16, Qes=0,68)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 184 mm
  • overall diameter d = 217 mm
  • mounting depth (not countersunk) t = 91 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 20 L volume
from 70/44 Hz (-3dB/-8dB)
 
recommended cabinet 2:
70 L volume bass reflex cabinet
with HP100 reflex tube, 19 cm long.
from 35/28 Hz (-3dB/-8dB).

PT 210M/8       order no. not-available       - not available
20 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 90/130 W
  • frequency range = 35-2000 Hz
  • resonance frequency fs = 33 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,7 dB (2,83V; 1m)
  • DC resistance Re = 6,1 Ohm
  • force factor BL = 7,7 N/A
  • voice coil inductance L = 1,6 mH
  • effective piston radiating area Sd = 225 cm2
  • effective mechanical mass incl. air load mms = 21,1 g
  • equivalent volume of compliance Vas = 81 l
  • total Q factor Qts = 0,38 (Qms=2,29, Qes=0,45)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 4 mm
  • mounting diameter d = 184,5 mm
  • overall diameter d = 210,5 mm
  • mounting depth (not countersunk) t = 87 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 7,3 L volume
from 88/56 Hz (-3dB/-8dB)
 
recommended cabinet 2:
19 L volume bass reflex cabinet
with HP70 reflex tube, 23 cm long.
from 51/39 Hz (-3dB/-8dB).

HDS-205       order no. not-available       - not available
21 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 180/220 W
  • frequency range = xxx-1000 Hz
  • resonance frequency fs = 30 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 91 dB (2,83V; 1m)
  • DC resistance Re = 5,7 Ohm
  • force factor BL = 9,9 N/A
  • voice coil inductance L = 1,8 mH
  • effective piston radiating area Sd = 220 cm2
  • effective mechanical mass incl. air load mms = 28 g
  • equivalent volume of compliance Vas = 67 l
  • total Q factor Qts = 0,27 (Qms=3,02, Qes=0,3)
  • voice coil diameter = 33 mm
  • maximum peak linear excursion vibration xlin = +/- 5,5 mm
  • mounting diameter d = 190 mm
  • overall diameter d = 225 mm
  • mounting depth (not countersunk) t = 90 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 28 L volume
from 64/40 Hz (-3dB/-8dB)
 
recommended cabinet 2:
96 L volume bass reflex cabinet
with HP100 reflex tube, 16 cm long.
from 33/26 Hz (-3dB/-8dB).

CSX-257W       order no. not-available       - not available
24 cm bass driver with sandwich cone.
  • power handling (continuous/programme) = 120/160 W
  • frequency range = 25-800 Hz
  • resonance frequency fs = 28 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,2 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 10 N/A
  • voice coil inductance L = 2,9 mH
  • effective piston radiating area Sd = 330 cm2
  • effective mechanical mass incl. air load mms = 51,9 g
  • equivalent volume of compliance Vas = 144 l
  • total Q factor Qts = 0,35 (Qms=2,56, Qes=0,4)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 220 mm
  • overall diameter d = 257 mm
  • mounting depth (not countersunk) t = 99,6 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 33 L volume
from 45/28 Hz (-3dB/-8dB)
 
recommended cabinet 2:
131 L volume bass reflex cabinet
with HP100 reflex tube, 26 cm long.
from 21/18 Hz (-3dB/-8dB).

CC-260       order no. not-available       - not available
24 cm bass driver with polypropylene cone.
  • power handling (continuous/programme) = 100/140 W
  • frequency range = 55-3000 Hz
  • resonance frequency fs = 25 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 87 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 10 N/A
  • voice coil inductance L = 3,3 mH
  • effective piston radiating area Sd = 310 cm2
  • effective mechanical mass incl. air load mms = 50,8 g
  • equivalent volume of compliance Vas = 87 l
  • total Q factor Qts = 0,45 (Qms=2,65, Qes=0,54)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 221 mm
  • overall diameter d = 260,5 mm
  • mounting depth (not countersunk) t = 103 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 3 L volume
from 87/55 Hz (-3dB/-8dB)
 
recommended cabinet 2:
4,4 L volume bass reflex cabinet
with HP70 reflex tube, 124 cm long.
from 64/47 Hz (-3dB/-8dB).

XLS-10       order no. not-available       - not available
25 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 250/400 W
  • frequency range = < 100 Hz
  • resonance frequency fs = 18 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 88,4 dB (2,83V; 1m)
  • DC resistance Re = 5,4 Ohm
  • force factor BL = 17,5 N/A
  • voice coil inductance L = 4,3 mH
  • effective piston radiating area Sd = 333 cm2
  • effective mechanical mass incl. air load mms = 135 g
  • equivalent volume of compliance Vas = 80 l
  • total Q factor Qts = 0,17 (Qms=2,63, Qes=0,18)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 12,5 mm
  • mounting diameter d = 240 mm
  • overall diameter d = 269,3 mm
  • mounting depth (not countersunk) t = 118,2 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 7,9 L volume
from 71/45 Hz (-3dB/-8dB)
 
recommended cabinet 2:
15 L volume bass reflex cabinet
with HP100 reflex tube, 117 cm long.
from 46/34 Hz (-3dB/-8dB).

XLS-12       order no. not-available       - not available
29 cm bass driver with high quality cone.
  • power handling (continuous/programme) = 250/400 W
  • frequency range = < 150 Hz
  • resonance frequency fs = 18 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 90 dB (2,83V; 1m)
  • DC resistance Re = 3,5 Ohm
  • force factor BL = 8,9 N/A
  • voice coil inductance L = 1,3 mH
  • effective piston radiating area Sd = 462 cm2
  • effective mechanical mass incl. air load mms = 166,3 g
  • equivalent volume of compliance Vas = 136 l
  • total Q factor Qts = 0,2 (Qms=3,7, Qes=0,21)
  • voice coil diameter = 51 mm
  • maximum peak linear excursion vibration xlin = +/- 12,5 mm
  • mounting diameter d = 278 mm
  • overall diameter d = 308 mm
  • mounting depth (not countersunk) t = 126 mm

show kits to this chassis hide kits

recommended cabinet 1:
closed cabinet with 75 L volume
from 44/28 Hz (-3dB/-8dB)
 
recommended cabinet 2:
294 L volume bass reflex cabinet
with 2x HP100 reflex tube, 19 cm long.
from 21/17 Hz (-3dB/-8dB).

CCX-315/8       order no. not-available       - not available
30 cm bass driver with polypropylene cone.
  • power handling (continuous/programme) = 160/200 W
  • frequency range = 25-500 Hz
  • resonance frequency fs = 24 Hz
  • impedance R = 8 Ohm
  • sound pressure level SPL = 89,3 dB (2,83V; 1m)
  • DC resistance Re = 5,5 Ohm
  • force factor BL = 11,6 N/A
  • voice coil inductance L = 2,8 mH
  • effective piston radiating area Sd = 520 cm2
  • effective mechanical mass incl. air load mms = 80,2 g
  • equivalent volume of compliance Vas = 210 l
  • total Q factor Qts = 0,43 (Qms=3,72, Qes=0,49)
  • voice coil diameter = 39 mm
  • maximum peak linear excursion vibration xlin = +/- 9 mm
  • mounting diameter d = 280 mm
  • overall diameter d = 315 mm
  • mounting depth (not countersunk) t = 112 mm

show kits to this chassis hide kits

SDS 3.5 Zoll Passive Radiator 830878       order no. not-available       - not available
. The diaphragm is varnished with a hydrophabic coat.
  • maximum peak linear excursion vibration xlin = +/- 5 mm
  • mounting diameter d = 93 mm
  • overall diameter d = 124 mm
  • mounting depth (not countersunk) t = 29,4 mm
PDF data sheet

show kits to this chassis hide kits

Tweeter  
Full Range   Woofer   Subwoofer   no longer sold  
The cabinet volume calculations are executed considering an external resistance of 0.3 Ohm. We are using, if no other data is known or available, the information supplied by the manufacturer.

Please note: the frequency response doesn't say much about the cut-off frequency inside the cabinet! Therefore, we mostly give you 2 examples with dimensioning considerations and an indication, how low the loudspeaker will reproduce.

Home  
 
© Copyright 2015 Iris Strassacker; All rights reserved. - errors and omissions excepted